Author Topic: NEW 10-30 SIGNAL PROBLEM.  (Read 645 times)

Offline 68jk09

  • Hero Member
  • *****
  • Posts: 10130
  • Gender: Male
NEW 10-30 SIGNAL PROBLEM.
« on: November 15, 2018, 02:46:00 PM »
11-14-18...From Operations....Units shall be extra dilligent on HW due to the fact that the Tone alert will not go off on the following conditions. Communications has advised Fire Operations that when Dispatchers receive multiple calls & load up the Box, the additional Units assigned to the box will receive a Message on the teleprinter (10-30 Load up the Box) WITHOUT TONE ALARMS.  Members assigned to Housewatch shall monitor teleprinter as they may receive a response WITH OUT TONE ALARM (10-30 LOAD UP THE BOX).  Fire communications is working on the problem & hope to have it corrected as soon as possible.

Nycfire.net

NEW 10-30 SIGNAL PROBLEM.
« on: November 15, 2018, 02:46:00 PM »

Offline 68jk09

  • Hero Member
  • *****
  • Posts: 10130
  • Gender: Male
Re: NEW 10-30 SIGNAL PROBLEM.
« Reply #1 on: November 15, 2018, 03:02:40 PM »
Word from a Dispatcher... QUOTE..It is only a code used by Dispatchers to generate the screen . We have been instructed not to use it until further notice. UNQUOTE.

Offline memory master

  • Hero Member
  • *****
  • Posts: 2176
Re: NEW 10-30 SIGNAL PROBLEM.
« Reply #2 on: November 15, 2018, 03:10:34 PM »
Bring back the three rings on the phone and the bells.