Inside cab pictures

X

Xavier

Joined
Jun 21, 2020
Messages
17
Hi all
I am a fire collector from France. I design myself fire trucks in order to print them. I then customize the with leds.
20230809_094324.jpg
I was looking for some pictures of the inside cab of Ferrara ladders, KME Engine and Seagrave 2020 Engine.
Would somebody be willing to send me some pics from these apparatus ?
Thanks !

Xavier
 
That’s interesting. Do you mean you 3-D print them? Do you have any photos of finished pieces?
 
I got interior shots of 153's new Seagrave 75' Tower Ladder which should give you an decent idea as to how the Seagrave Pumpers interiors look.
 
Thanks !
To what I see, KME and Seagrave cabs are pretty much the same, and towers have the same cabins than engines.
Only ladder cabins differ, am I right ?
 
Xavier said:
Thanks !
To what I see, KME and Seagrave cabs are pretty much the same, and towers have the same cabins than engines.
Only ladder cabins differ, am I right ?
Click to expand...
Squad & Rear-Mount Ladder Cab's are Longer and have additional compartments on the Interior/Exterior
 
-Fdnyrigs said:
Squad & Rear-Mount Ladder Cab's are Longer and have additional compartments on the Interior/Exterior
Click to expand...
Thanks ! I saw on inside views of a rearmount that the middle of the cabin was used (motor transmission) contrary to the engine/tower ones
 
-Fdnyrigs said:
Squad & Rear-Mount Ladder Cab's are Longer and have additional compartments on the Interior/Exterior
Click to expand...
Looking at photos l see the squad cabs are a few inches longer it seems, l never noticed it until reading your post. ls it 6''- 8'' longer at the most ?
 
Nasibova said:
Looking at photos l see the squad cabs are a few inches longer it seems, l never noticed it until reading your post. ls it 6''- 8'' longer at the most ?
Click to expand...
I don't have the Squad Drawings open right now on my side but if I remember correctly it's around 6" longer than the standard Pumper. Meanwhile, the New Rearmount Aerials are just about a 1 foot longer than your Regular Pumper & Tower Ladder Cab's Length both of which are nearly identical in length.
 
Thabks for these answers. That pretty much helped me.
Here is the result printed. Does the interior seems conform to you ?
 

Attachments

  • 20230816_092441.jpg
    20230816_092441.jpg
    255.1 KB · Views: 38
  • 20230816_092446.jpg
    20230816_092446.jpg
    146.6 KB · Views: 31
Xavier said:
Hi all
I am a fire collector from France. I design myself fire trucks in order to print them. I then customize the with leds.
View attachment 38666
I was looking for some pictures of the inside cab of Ferrara ladders, KME Engine and Seagrave 2020 Engine.
Would somebody be willing to send me some pics from these apparatus ?
Thanks !

Xavier
Click to expand...
You can try this website, I colleague of mine showed me this site of all the apparatuses in his area, https://massfiretrucks.com/ , you might be able to find a photo.
 
Does anyone have or know of where to find interior photos for the tilt cab rigs like one in the photo example below? I know the seats faced backwards on this spec cab. All Seagrave Rear-Mounts from 1993-1995 were built with that cab, 1993-1997 FWD 75' Baker Tower Ladders & High Pressure Pumpers (Ex. E-10, E-6) & Select Regular Pumper's Engine 277, 42, 258...


3737757_orig.jpg
 
You must log in or register to reply here.
Back
Top