The body on our 1982 Mack at R*2 had the body by Saulsbury....no complaints & the chassis by Mack was also a garbage truck chassis w/a single rear axle. after driving the 1976 Mack R w/the motor out front it took awhile getting used to the 1982 Cab but it had a good turning radius & overall was a good Rig.fdny747 said:I remember when Salisbury Fire Apparatus use to build them. They need to reopen they made dam good trucks
The satellites are a single piece unit, they don't have a 2nd piece. They basically are nothing more than a hose wagon with a large monitor on top. Very different purpose than the truck you put the link to.fdny747 said:http://www.videos.fireapparatusmagazine.com/detail/videos/the-rig/video/5634660385001/ferrara-inundator-super-pumper?autoStart=true&page=0&cmpid=enl_faee_the_rig_2018-01-21
Why not do this and then only have 1 piece not have to have the second piece?
The Satellites currently carry 6" LDH. In reading this all I hear is LDH and large monitor what about the large manifold on the satellite where the pump would be on an engine that enables the satellite to be feed by several hydrants and or engines.raybrag said:Someone more knowledgeable can correct me, but it is my understanding that the primary purpose for the satellites in today's FDNY is as a hose wagon to carry large amounts of 5" hose in case a long stretch of it is needed (think Staten Island brush fires), with a secondary purpose of making a large caliber monitor available when needed. In the recent past (before the new foam rigs) a third purpose was to carry a large number of foam cans. None of these uses require a pump, especially a large capacity one. It's a totally different question as to whether FDNY needs/wants/could use a large capacity pumper such as the Innundator (and one which I have no clue how to answer).
The ENG associated has to have a normal hose compliment for 1st alarm ops that do not involve Sat hose..manifolds etc. & 324 for instance does a good amount of running & working in their 1st 2nd & 3rd Due area so rolling around in a very large Rig would be counterproductive.....plus if they had the Big Rig at lets say an AH in Corona then there is no SAT for QNS....this way the SAT remains in qtrs & available for transport by the Backup ENG.fdny747 said:http://www.videos.fireapparatusmagazine.com/detail/videos/the-rig/video/5634660385001/ferrara-inundator-super-pumper?autoStart=true&page=0&cmpid=enl_faee_the_rig_2018-01-21
Why not do this and then only have 1 piece not have to have the second piece?
As Ray indicated, the original purpose of the Super Pumper System was to deliver large amounts of water through large diameter hose anywhere in the city. Original literature of the day described the SPS as a portable pumping station or a land based fireboat (both of which were being phased out or reduced in number). The original three satellites and the SP Tender laid out their LDH from pre-determined large capacity mains, fireboat mooring points, or drafting sites to the location where the water was needed. The SP would pump from that remote location.raybrag said:Someone more knowledgeable can correct me, but it is my understanding that the primary purpose for the satellites in today's FDNY is as a hose wagon to carry large amounts of 5" hose in case a long stretch of it is needed (think Staten Island brush fires), with a secondary purpose of making a large caliber monitor available when needed. In the recent past (before the new foam rigs) a third purpose was to carry a large number of foam cans. None of these uses require a pump, especially a large capacity one. It's a totally different question as to whether FDNY needs/wants/could use a large capacity pumper such as the Innundator (and one which I have no clue how to answer).